Kambrook CERAMIC KCE440 - Manual (Page 7)

7
The heater will
start operating
at the HIGH
heat setting.
Leave at HIGH
until the room
temperature is
comfortable.
Quick Start Guide
Hints/Tips to Retain Heat in
Your Home
• Don’t overheat your home. The
temperature of a heated room in
winter should be 18-21°C
• Your heater will work more
efficiently if you stick to Kambrook’s
recommended clearance spaces
• Choose the right size heater for the
room type you want to heat
• Zone off unoccupied rooms by closing
doors and only heat the main living
areas
• Fit window coverings like curtains to
limit winter heat loss
• Put draft stoppers, such as a rolled
up towel, at the bottom of outside
doorways to keep out cold air
• Keep the heat in and the cold out by
installing wall and ceiling insulation.
• Avoid placing items too close to the
heater (both at the front and back)
for optimal air flow
Turning the
heater on
Setting the
variable
temperature
Setting the
heating
mode
Setting the
oscillation
Turning the
heater off
Press the
MODE button
to select AUTO
setting.
Plug the cord
into a 230V or
240V power
point and
switch on.
Rotate the
dial clockwise
to increase
temperature,
and anti-
clockwise
to decrease
temperature.
Switch on the
unit using the
ON/OFF switch.
Press the SWING
button to
activate. Press
again to stop
the oscillation.
Press the On/
Off button to
activate.
Press the On/Off
button to place
the heater in
standby mode.
Switch off the
unit using the
ON/OFF switch.
Press the MODE
button to
select the LOW
heat setting,
and retain a
comfortable
temperature for
your room.
TEM
PERATUR
E
SW
ING
KCE440_IB_FA.indd 7 12/10/09 2:26 PM