Selecting virtual tracks and editing tracks, Writing/burning to cdr/cdrw – KORG EASYSTART D12 User Manual
Page 5
D12 EasyStart
5
3.
To store additional scenes, start song playback and change mixer settings, then press the [STORE] key, followed by
pressing the [SCENE] key again. Each time you do this, a new scene will be created and stored in the Scene Memory.
4.
You can also get a visual picture of what each Scene looks like, and edit its parameters, by selecting the “MixView” tab
in the display and using the TRACK Faders and PAN knobs to adjust values. The changes you make will be indicated in
the display.
!
You can reset a Scene’s Fader and Pan settings by moving each fader and pan knob until the display indicates two
“arrows” versus a single directional arrow.
Selecting Virtual tracks and Editing tracks
1.
Press the [TRACK] key.
2.
Using the CURSOR and the DIAL, select which virtual track you will be listening to or recording to. To adjust Virtual
Track settings for tracks 7-12, press the [TRACK] key again to access the “Vtr7-12” tab in the display. For more info on
Virtual tracks refer to the Owner’s Manual pgs. 27, 81.
3.
To use the “EditTrk” function, you must first select a range of the song to be edited by storing an IN, OUT and TO
location (some editing functions also require an END location). To do this, move to the desired song location, and then
press the [STORE] key followed by the LOCATE key for each location. Once you’ve set locate points, you can edit the
specific region in the track(s).
4.
To see the list of edit functions, select the “
” button next to “CopyTrack” in the display. To access a function, select
the ”radio button” to the left of the function you wish to perform and then select “OK” using the CURSOR and [ENTER]
keys.
5.
To execute the function, select Exec. in the display. For more information on editing tracks, refer to the Owner’s Manual
pgs. 81-87.
Writing/Burning to CDR/CDRW:
1.
Once you have finished a song and performed a mixdown to two tracks (refer to Owner’s Manual pgs. 29-31:Combining
multiple tracks into two: Bounce), press the [SONG / CD ] key until the “CDR/RW” tab is selected.
2.
Insert a blank CDR or CDRW disc into the CDR/RW drive and press WriteToCD in the display.
3.
Select the speed (“2x or 4x”) and “YES” next to “AreYouSure?”
Important D1600 Guide and Owner’s Manual references:
You can download a more in-depth “D12 Guided Tour” and additional “tips and tricks”
important references to modes and applications in the D12 Owner’s Manual. Some of these references are listed below:
Installing the CDRW-1x8 drive
133
CD Mastering
49 / 90
D12 MIDI sync procedures
73 / 76
Recording MIDI clock from an external sequencer
63 / 96
Using MIDI to control Scenes
41 / 74
MIDI Machine Control (MMC)
73 / 77
Working with WAV files and the Import/Export function
86
Initializing/formatting internal or external hard drive
67 / 79
Backing up and restoring data
66 / 77
Connecting external drives
67
Updating system software
135
Troubleshooting
127