Samsung SPH-N200 - Manual (Page 93)

Using the Voice Services of Your Sprint PCS Phone 91
Ge
tt
in
g
S
ta
rte
d
14
14
14
14
Nav
igat
in
g and
Ent
eri
n
g
T
ext
14
6. To store the phone number, press . The number
you entered displays, along with the notification
‘Recorded’. If the number you entered matches a
name/number already stored in your Internal Phone
Book, then the name also displays.
7. The screen then returns to the Voice Dial menu.
Setting Up Voice Dial
Voice Dial is always active once you have programmed the
phone to accept Voice Dial entries. To place voice activated
calls, press and hold
. Then say the name into the
phone after you hear the voice prompt and the beep.
You can also initiate a voice activated call by opening the
flip, when the Voice Dial option is activated.
To change the Voice Dial setup options:
1. From the Main Menu press for Voice Dial .
2. Press for Set Active .
3. Press the toggle to locate the option:
ᮣ Talk Only Enables voice dialing by pressing and
holding .
ᮣ Talk / Flip Enables voice dialing by pressing and
holding (when the phone is open), or by simply
opening the phone’s flip cover.
4. When the desired option displays, press .
Placing a Call Using Voice Dial
To place a call if Voice Dial is inactive:
1. Open the phone.
2. Press and hold down the key.
3. At the voice prompt, say the name into the phone.
ᮣ
The phone automatically places the call if it recognizes
the name.
ᮣ
If the phone does not recognize the name, it prompts for
the name again.
ᮣ
If the phone is unable to recognize the name after two
attempts, it prompts “The name cannot be recognized.”
and the following message displays: “Cannot recognize