Konica Minolta Konica Digital Revio KD-300Z - Manual (Page 37)

67 66
Selecting the Video Output Mode
When traveling overseas, differences in television standards may make
it impossible to view pictures normally on local television monitors. In
this case, use this function to select the television standard of the
locality in which you are using the camera.
¶ The camera’s default value is NTSC.
<Operation>
1 Press the “ %” or “fi” button to
select [VIDEO OUT].
2 Press the “ #” button.
Selecting the Display Language
The camera’s display language can be set to either English or
Japanese.
<Operation>
1 Press the “ %” or “fi” button to
select [LANGUAGE].
2 Press the “ #” button.
3 Use either the “ %” or “fi”
button to select [ ]
(Japanese) or [ENGLISH]
4 Press the “ @” button (or “ ”
button) to complete the setting.
3 Use either the “ %” or “fi”
button to select [PAL] or
[NTSC]
4 Press the “ @” button (or “ ”
button) to complete the setting.
2001.7.6, 6:16 PM Page 66-67