Kompernass KH 222 - Manual (Page 14)

 | Operating Instructions
GB
... Repeat CD
To repeat all tracks on the audio CD press the “Repeat” but-
ton twice during playback of a music title.
Activation of CD repeat is indicated by “RPT” appearing on the
LCD display to the left of the current track number.
The entire audio CD continues to be repeated until CD re-
peat is turned off.
To turn off CD repeat press the “Repeat” button once. “RPT”
indicated on the LCD display to the left of the current track
number is faded out.
In the event that a CD is currently being played, then stop
playback by pressing the “STOP” button.
 Press the “Program” button once …
• “1” flashes on the display to indicate the first program
storage place.
• “PRG” is faded in to the left of the displayed title storage
place.
 Select with the “Next”/”Back” button the desired music
title for the first program storage place.
 Then press the “Program” button once again to program
the selected music title.
The display will now indicate the number of the next program
storage place – in this example “02” to denote the second pro-
gram storage place.
 Repeat steps 3 and 4 until all music titles of your compila-
tion have been programmed in the desired sequence. Up to
20 titles can be programmed.
 Press the “Play/Pause” button to start playback of the
programmed compilation of titles. “PLAY” and “PRG” are
indicated on the display.
.. Programming a compilation of tracks
(PROGRAM function)
You can compile your own music programme with the pro-
gram function merely by selecting certain tracks on an au-
dio CD for repeat. Moreover, you can decide the sequence in
which the titles are to be played.
Proceed in the following manner to program your own track
compilation for playback …
 Place the desired audio CD in the set.
Manual_KH222_EN 08.09.2003, 16:47 Uhr 14