Samsung STH-N271 - Manual (Page 36)

69
C Ca al ll l R Re ec co or rd ds s
68
C Ca al ll l R Re ec co or rd ds s
Calling Card
Menu 4.9
When you use a calling card for long distance calls,
you must send the service code and the card number
to the calling card service system. Using this menu,
you can save these calling card information to send
them automatically when you make calling card calls.
You can store up to five calling cards.
Enter 4-digit phone lock code and press the OK soft
key to access the Calling Card menu.
Note: The procedure to make calling card calls may
not apply to all calling cards. Please look at
the back of your calling card or contact your
Service provider for instructions.
Saving Calling Card Information
1. Scroll to the desired calling card using the key
and press the Select soft key.
2. If you want to set the card name, press the Select
soft key. Enter the name as needed. For further
details on entering a name, see page 31.
3. When finished entering the name, press the OK
soft key. The name is saved.
4. Press the key to select the Card Number menu
and press the Select soft key.
5. Enter the card number (and/or PIN if required) as
listed on the back of the calling card.
To enter a pause, “P” before the second number,
press and hold the
key. the number after “P”
will be sent only by pressing the key when
you make a calling call.
Note: The order of the numbers which you must
enter may vary depending on the dialing
sequence your card uses.
6. When finished entering the number, press the OK
soft key.
7. To return to idle mode, press the key.
Selecting a Calling Card
1. Scroll to the desired calling card using the key
and press the Select soft key.
2. Select Set Default using the key and press
the Select soft key.
3. The display shows the number saved for the calling
card. If you are satisfied, press the Set soft key.
4. To return to idle mode, press the key.
Making Calling Card Calls
1. Make a call to the calling card service system.
2. When you are connected, press the Options soft
key and select Card Call using the key.
3. Press the OK soft key.
4. When you hear the tone from the calling card
service, press the key to transmit the card
numbers.
5. Dial the number of the designated phone.