Receiver operation – Kathrein 260376 User Manual
Page 14
RECEIVER OPERATION
14
Analog radio programs
To receive the analog radio programs press the
"RADIO" key. The LCD display readout indicates
"R .. " together with the most recently selected ra-
dio program position.
Information, such as that for the digital radio pro-
grams (ADR and DMX), is not available with ana-
log radio programs.
With analog radio programs, the program name is
entered in the setup menu.
For setting program names see the section
"Programming".
Program category selection with digital
radio programs in ADR/DMX mode
The digital radio programs are divided into various
categories by the program supplier.
In this mode you can use the
keys to
select programs that belong to just one particular
category (e.g. Rock or Classic).
The following categories are available:
1. GENERAL
2. CLASSIC
3. POP
4. OLDIES
5. ROCK
6. JAZZ
7. COUNTRY
8. SPECIALITY
9. REGIONAL
10.
NEWS/EVENTS
In succession press MODE + OK
Display readout:
1. General
select
→
[
OK
]
With the
keys make the desired selection
according to the table above and confirm with "ok".
Program selection is now only possible using the
keys, the numeric keys can no longer be
used.
If a category is not available the following message
appears on the display:
Category
does not exist!
To quit the program selection in category mode
press the MODE + OK keys once again
and then press BACK
Display readout:
Category mode
inactive
Display last title
In ADR- and DMX-mode you have the possibility to
fade-in the preceding music title once again by
using the BACK key.
By pressing the BACK key once more the current
title is then displayed again.
Volume, Balance, Tone control
You can adjust the volume by using the volume
keys
.
Volume
32
•
.
•
.
•
.
•
.
•
.
•
.
•
.
•
.
•
.
•
.
•
.
•
.
•
.
•
.
•
.
•
.
•
.
•
.
•
.
Whilst the volume indication is faded-in on the
display, you can activate the balance control with
the "ok" key and then press the ok key a further
time for tone control setting (treble and bass set-
ting). The setting is also carried out using the
keys.
The volume, balance and tone control is only ef-
fective at the AUDIO connections, and not at the
REC connections.
Sound On/Off
You can turn the sound off by means of the MUTE
key, e.g. if you making a phone call.
The sound muting is similarly only effective at the
AUDIO connections and not at the REC connec-
tions.