Kawasaki 76920 - Manual (Page 9)

9
7
8
9
10
Bottom View
6
Assembly
Handlebar Wire Harness
Handlebar
Guides
• Turn the handlebar upside down.
• Align the handlebar wire harness with the guides on the
underside of the handlebar.
• Push firmly on the handlebar wire harness near each
of the guides to secure the wire in the underside of
the handlebar.
Handgrip
Handgrip
Handlebar
• Position the handlebar upright.
• Fit a handgrip onto each end of the handlebar.
Helpful Hint: If the handgrips are difficult to slide onto the
handlebar, moisten the handgrips with warm water before
fitting them onto the handlebar.
FUEL E F
RPM x 100
FUEL E F
RPM x 100
Handlebar
• Apply labels #7 and #8 to the handlebar, as shown.
7 8
Steering Column
Steering Column Bushing
• Wipe the steering column with a paper towel to remove
any dirt or oils.
• Fit the steering column bushing onto the straight end of
the steering column.
Steering Column
Steering Column
Bushing
Vehicle Body
Rectangular
Opening
• Insert the curved end of the steering column through the
rectangular opening in the vehicle body.
• Rotate the steering column bushing 1 /
4
turn and fit it into
the rectangular opening in the vehicle body.