Kyocera KX9e - Manual (Page 46)

38 Calling using digit dialing
5. If the phone finds multiple voice tags that
sound like the name you said, you will be
asked to verify which name you want to call.
Say
Yes when you hear the correct name. Say
No when you hear an incorrect name.
6. When you are finished with the call,
press
. You cannot end the call with a
voice command.
Erasing all voice tags
1. Select Menu → Settings →
Voice Features → Erase Voice Dial .
2. Select Yes .
3. Select Yes again at the confirmation.
Calling using digit dialing
You can speak the digits of a phone number
to dial it.
Note: You cannot speak a string of digits. You
must speak one digit at a time and wait for
the prompt.
1. From the home screen, press . The phone
responds: “Say a name or say ‘Dial’.”
2. Say “ Dial .” The phone responds:
“Speak a digit.”
3. Speak the first digit of the phone number you
want to call. Once the phone repeats the digit,
you can speak the next digit.
If you pause, the phone prompts you with the
following five options. After the prompt, speak
an option.
– Say “
Clear ” to erase the last digit entered.
The phone responds: “Digit cleared.”
To clear the entire phone number, say
“Clear” again. When the phone prompts
you with “Clear entire phone number?”,
say “Yes” to clear or “No” to cancel.
– Say “ Call ” to dial the number.
– Say “ Verify ” to hear the set of
spoken digits.
– Say “ Cancel ” to exit voice recognizer and
return to the home screen.
– Speak a digit to enter the next digit. Once
the phone repeats the digit, you can speak
the next digit or pause to hear the prompt.
Using voice features with
hands-free car kits
You can use voice commands to make a phone
call or to answer the phone only if your phone is
connected to a portable hands-free car kit
(sold separately).
Note: The following features apply only to
portable hands-free car kits unless noted.
To shop for these accessories, visit
www.kyocera-wireless.com/store or call
800-349-4188 (U.S.A. only) or 858-882-1410.
82-G1677-1EN.book Page 38 Wednesday, June 7, 2006 2:06 PM