Sounds, Key beep, Alert – Samsung SCH-620i User Manual

Page 20: Alarm, Ring

Advertising
background image

Key Beep

Menu 3-2

This option allows you to adjust the tone volume that the
keypad generates when you press a key. You can also use

or

key on the left side of the phone to adjust key

volume in the idle mode.

Alert

Menu 3-3

Minute Beep

With this menu option set to ON, the phone beeps every
minute during an outgoing call to keep you informed of the
duration of your call.

Service Area

With this menu option set to ON, the phone beeps when you
exit service area or when you return to a service area.

Alarm

Menu 3-4

The option allows you to set the alarm to ring at a specific
time.
The following options are available.

Daily: the alarm rings every day at the same time.

One Time: the alarm rings only once and is then deactivated.

To set the alarm, proceed as follows.

1. Select Set.

2. Choose the alarm frequency option.

3. Enter the required time.

4. Press

key.

To stop the alarm when it rings, simply open the flip cover or
press any key. To deactivate the alarm, select Release.

37

S o u n d s

36

S o u n d s

Ring

Menu 3-1

Ring Volume

This option allows you to adjust the ringing volume to one of
nine levels. You can also turn the ringer off. Use the

or key

on the left side of the phone. The greater the number of bars,
the greater the volume. You will also hear a sample tone.

Note: During an incoming call, you can mute the ringer by

pressing key.

Ring Type

This option allows you to indicate how you are to be informed
of any incoming calls. The following options are available.

BELL: The phone rings using the ring tone selected via the

menu option.

LAMP: The backlight is switched on and the lamp blinks; the

phone neither rings nor vibrates.

VIBRATOR: The phone vibrates but does not ring.

VIB + BELL: The phone vibrates first, then rings.

Ring Tone

This option allows you to select the required ringing tone. You
can choose among 20 different tones or melodies. Each time
you select a tone, it is played for a few seconds.

You can use the Sounds feature to customize various sound
settings, such as the:
• Ring volume, type, and tone
• Alert sounds

Sounds

END/

OK/

Advertising