Kodak EASYSHARE D1025 - Manual (Page 13)

Getting started
www.kodak.com/go/support 8
Attach a slot-style standard picture frame
SLOT-style
■ Use the clips that are attached to the digital frame’s back panel.
■ Rotate and depress the clips as needed to engage the slot in the standard frame.
If necessary:
■ If a deep picture frame places the slot above the clips, carefully bend the clips
up—slightly above the slot. Then, rotate and depress the clips to slide them into
the slot.
■ Tighten the screws to secure the clips. Be careful not to over-tighten.
Glass removed
Glass removed
D1025
D825
Purchased standard
picture frames