Kyocera ECOSYS FS-9520DN - Manual (Page 51)

Chapter 3 Using the Operator Panel
3-30
Linefeed (LF) Action
This procedure instructs the printer what to do when it re-
ceives a linefeed code (character code 0AH).
Press the MENU key.
Press the or key repeatedly until Page Set >
appears.
Press the key.
Press the or key repeatedly until >LF Action
appears.
Press the ENTER key. A blinking question mark (?)
appears.
Press the or key repeatedly until desired line-
feed action appears.
LF only A linefeed is performed. (default)
CR and LF A linefeed and carriage return are
performed.
Ignore LF The linefeed is ignored.
When the desired action is displayed, press the
ENTER
key.
Press the MENU key. The message display returns to
Ready.
Carriage-Return (CR) Action
This procedure instructs the printer what to do when it re-
ceives a carriage-return code (character code 0DH).
Press the MENU key.
Press the or key repeatedly until Page Set >
appears.
Press the key.
Press the or key repeatedly until >CR Action
appears.
Press the ENTER key. A blinking question mark (?)
appears.
Press the or key repeatedly until desired car-
riage-return action appears.
CR only A carriage-return is performed. (Default)
CR and LF A carriage-return and linefeed are
performed.
Ignore CR The carriage-return code is ignored.
When the desired action is displayed, press the
ENTER
key.
Press the MENU key. The message display returns to
Ready.
Wide A4
Turn this On to increase the maximum number of characters
that can be printed in a line for A4 page (78 characters at 10
pitch) and Letter size page (80 characters at 10 pitch). This
setting is effective only in PCL 6 emulation.
Press the MENU key.
Press the or key repeatedly until Page Set >
appears.
Press the key.
Press the or key repeatedly until >Wide A4 ap-
pears.
Press the ENTER key. A blinking question mark (?)
appears.
Page Set >
>LF Action
LF only
>LF Action
? LF only
Page Set >
1
2
3
4
5
6
7
8
1
2
3
>CR Action
CR only
>CR Action
? CR only
Page Set >
>Wide A4
Off
>Wide A4
? Off
4
5
6
7
8
1
2
3
4
5