Kyocera KX5 - Manual (Page 37)

User Guide for the Kyocera Slider Remix KX5 Phone 29
Putting music files onto the
memory card
Music files can be put onto the memory card by
either using an optional memory card reader for
your computer or by using an optional KX5 USB
cable and placing the KX5 into
Mass Storage Mode .
Note: Use only a previously formatted memory
card when loading music files.
Using a Memory Card Reader
1. Connect the memory card reader to your
computer.
2. Insert the memory card into the memory card
reader. Locate the Removable disk drive on
your computer.
3. Locate the music files to be placed onto the
memory card and “drag and drop” them to
the Removable disk drive.
Note: The KX5 supports the following music
file types: .mp3, .aac, .mp4, .3gp, .3g2, .m4a
and m4b.
4. Place music files into the “Music” folder
located on the memory card.
Using a KX5 USB cable
1. Load the USB Drivers CD onto your computer
and follow the on-screen prompts. (This is
only required during the initial set-up).
2. Plug the USB cable into bottom of the KX5
3. Plug the USB cable into a USB port on your
computer.
4. On the phone select Menu
→
Settings
→
USB Storage
→
Enabled .
5. our KX5 phone will now be 'viewed' by your
computer as a 'Mass Storage Device'
6. On your computer double click on 'My
Computer'
7. You will see the Transflash Card inserted in
the KX5 as a Removable disk drive.
8. Double click on the appropriate Removable
Disk drive
9. Double click on the Music folder.