KORG XTENDED DEFINITION D32XD - Manual (Page 20)

10
16 LCD CONTRAST knob
This knob adjusts the contrast of the LCD screen.
The appearance of the LCD screen may differ depending on your viewing angle,
so adjust the contrast using this knob for the best visibility. Turning this knob
toward the right will make the text darker, and toward the left will make the text
lighter.
Depending on the content that is displayed in the LCD screen, you may notice vertical lines in
the screen. This is not a malfunction.
17 Control knobs
Use these knobs to edit various effect parameters in the effect tab pages.
18 SEND knob, INTERNAL 1/2, AUX 1/2/3/4 [*AUX 1/2] keys
Use these knobs and keys to specify the send amount and destination of each
send (EFF Send 1/2, AUX Send 1/2/3/4 [*Send 1/2]) and in the “Ch View” tab
page.
Even when other tab pages are displayed, operating this knob or any of these
keys will automatically open the send tab page in the display, allowing you to
edit the settings immediately.
19 Equalizer knobs, equalizer band keys
In the “Ch View” and “EQ/ATT” tab pages you can use these knobs and keys to
adjust the individual equalizer settings.
Even when other tab pages are displayed, operating these knobs or keys will
automatically open the “EQ/ATT” tab page, allowing you to edit the settings
immediately.
20 METER key
This key accesses a screen that shows the audio levels of the song, the presence
or absence of audio events, and a list of virtual tracks (“TrackView”). You can
also switch this to a “FaderView” that lets you change the position at which the
level meters are inserted, or check the fader or pan positions.
21 PAN knobs ----------- D32XD
This knob adjusts the position (pan) in the master LR bus for the channel
selected by the CH SELECT key.
22 AUTOMATION indicator
This will light when the automation function is on.
23 Page mode keys
Press these keys to move to the corresponding page
mode. The MIXER key and the CD key will take
you to the corresponding page jump menu screen.
24 UNDO key
The Undo function allows you to go back and listen
to the audio as it was before an Edit was per-
formed. The Redo function brings back the edited
result.
You can retrace your steps through as many as six-
teen prior recording or editing operations. (
→p.147).
25 STORE key
Press this key to register the current time location as a locate point, a mark, or for
a scene. (
→p.38, 39, 52, 148)
26 SCENE key
This key stores mixer settings such as the channel faders, pan knobs, EQ, and
effect send as a “scene” at the desired location in a song. If you play back with
22
23
24
25 26 27 28
29
30 31 32
33
34
35
36
37
38
39