Operation interface, Setup before operation – Kodak DVD-845 User Manual

Page 9

Advertising
background image

OPERATION INTERFACE

The unit supports two choices of audio

output: Analogy audio and digital audio.

Analog audio includes stereo 2 channel and

5.1 channel. Digital audio includes optical and

coaxial output. Digital audio obtains a better

effect than analog.

Stereo Output:

Connect with audio output jack for the mixing

audio of the unit and the stereo input of TV

or amplifier by audio cable.

5.1 channel output:

Connect with 5.1 channel output of the unit

and corresponding input of amplifier by audio

5.1 channel cable.

Coaxial output:

Connect the Digital coaxial cable to the coaxial

output of the unit and the corresponding input

of amplifier.(with digital coaxial inlet)

Optical output:

Connect the Toslink optical cable to the optical

output of the unit and the corresponding input

of amplifier.(with digital optics inlet).

stereo input of TV or amplifier.

Each connection must match to the internal

setup of the unit. Please refer to the unit and

the connection equipment before connection.

DVD player supplies a wide dynamic range

of frequencies so the amplifier volume must

be suitable levels or the speakers may be

damaged from sudden bursts of high volume

sounds.

During the operation, please power off

amplifier before power on/off DVD player, the

speaker may be damaged.

Setup Before Operation:

Before operation, please make sure the

following setup is correct.

Audio Output:

The unit has four choices of audio output: 2

channel, digital, 5.1 channel and stereo PCM.

Select different setup depending on your

connection. For more information, please refer

to system setup.

TV System:

Select the corresponding system depending

on your TV system. For more information,

please refer to system setup.

Video Output:

The unit has three choices of video output:

composite video, S-video, component video

output. Select different setup depending on

your connection. For more information, please

refer to system setup.

Note:

DVD disc can support different scale of

pictures. Maybe picture is not full screen or

part of picture has been blocked.

The manual refer to English OSD.

C5

Advertising