KRK KNS8400 - Manual (Page 13)

13
CONNECTING
The KRK KNS series headphones connect with almost any professional
and consumer audio device such as Professional Live, Recording and
Broadcast Mixers, Audio Interfaces, Headphone Amplifiers, personal
computers, personal media players, CD/DVD/Blu-Ray players.
Most professional audio equipment utilizes a ¼” socket for connection
of headphones. In this instance, the headphones are ready to use as
supplied with the ¼ screw-in adapter fitted.
Personal computers, media players and some consumer devices utilize
an 1/8” socket for connection of headphones. In this instance, please
un-screw the ¼ adapter from the tip of the cable to reveal the 1/8”
connection. Please remember to store the adaptor safely so that it can
be used when necessary.
Insert the headphone plug securely into the audio jack of the selected
audio device.
NOTE: KRK recommends turning off all sound enhancements / special
effects present in some consumer devices before use. This processing
can prevent you from getting the best performance from your headphones.
WARNING: The KNS headphones when driven by high-powered
headphone amplifiers have the capability to reproduce audio at levels
which can damage hearing over time. Please ensure good care when
connecting, setting up, and using your headphones. Keep in mind that
your ears are the most important tool of your trade, please treat them
accordingly.
WARNING: When plugging your headphones into a headphone amplifier,
please make sure that the level control on the amplifier / mixer / audio
interface is set to minimum and slowly raised to the required operating
level.