Kenwood KDV-MP5042U - Manual (Page 11)

English | 11
“MENU”
Item Setting Entry Setting overview Condition Page
“CODE SET”/
“CODE CLR” 1 sec. Sets/Resets security code. 24
“DIM” “OFF”*/ “ON” 4/ ¢ Adjusts the brightness of the display according to the surrounding
illumination. — —
“ICON” “OFF”/ “ON1”/
“ON2”* 4/ ¢ Sets the Graphics mode of the display. 34
“SWPRE” “R”*/ “SW”/ “AV” 4/ ¢ Sets the preout output. 34
“ZONE2” “F”/ “R”* 4/ ¢ Specifies the destination of sub source sound when the Dual Zone
function is turned on. 34
“AUTO1”/ “AUTO2”/
“MANUAL” “AUTO1”*/ “AUTO2”/
“MANUAL” 4/ ¢ Selects the tuning mode of the radio/HD radio. 33
“CRSC” “OFF”/ “ON”* 4/ ¢ Switches to Monaural to decrease noise when reception is poor. —
“HDR MODE” “AUTO”*/ “DIGITAL”/
“ANALOG” 1 sec. Sets the receive mode of HD Radio reception. 25
“CHANNEL”/
“PRESET” “CHANNEL”*/
“PRESET” 4/ ¢ Sets the seek mode of satellite radio. 31
“ESN=” Displays the Electronic Serial Number of satellite radio. —
“NAME SET” 1 sec. Sets the display when switched to AV IN or AUX source. 15
“M/V” Displays the firmware version of Microvision. —
“ABOOK” “SL”/ “NM”/ “FA” 4/ ¢ Sets the audio book playback speed. —
“SKIP” “0.5%”*/ “1%”/
“5%”/ “10%” 4/ ¢ Sets the ratio of skip performed with <Music/Video Search for
iPod>. 21
“iART” “OFF”/ “ON”* 4/ ¢ Specifies whether or not the artworks of the music files are
displayed. —
“FILETYPE” > “DISC”
> “USB”
“A/V”/ “PIC” 4/ ¢ Selects playback file type when a disc or USB contains different
types of files.
You can make advanced settings in the “FILE TYPE” of the Setup
menu. “A” or “V” may appear on the display after setting. 13
“SCL” “AUTO”*/ “MANU” 4/ ¢ Specifies whether the text is scrolled automatically. — —
“AVIN” “OFF”/ “ON1”*/
“ON2” 4/ ¢ Sets whether to display AV IN during source selection. 33
“DEMO” “OFF”*/ “ON” 2 sec. Specifies whether to enable demonstration. — 7
“iPodCTRL”
Item Setting Entry Setting overview Condition Page
“iPodCTRL”* 1 “HANDS ON”/
“MODE OFF”*
AUD
When set to “HANDS ON”, allows you to operate iPod with the
control on the iPod. 22
“DSP”
Item Setting Entry Setting overview Condition Page
“CONTROL” “EQ” [AUD] Sets the sound quality. 26
“B.BOOST” “OFF”*/
“STEP1”/ “2”
AUD
Sets the Bass Boost level in two steps. —
“HIGHWAY” “OFF”/
“STEP1”/ “2”/
“3”*/ “4”
AUD
Compensates the low volume or bass sound being lost by road
noises to make vocal sound clearer. 34
“POSITION” [AUD] Compensates the sound environment in accordance with the
listening position. 27
Next page 3