Kyocera 85221 - Manual (Page 4)

2 S D D i a p h r a g m P u m p s
■ S o l a r W a t e r P u m p i n g P r o d u c t s C a ta l o g ■
▼
Water Delivery up to 4.5 gpm /17.0 lpm,
Pumping Range 0-230 feet / 0-70 meters
Highest Quality Submersible
Pump in its Class
Field Serviceable with Simple Hand Tools
▼▼
SD Series Submersible Water Pumps
The Kyocera SD Series of
submersible solar pumps are
highly efficient, low voltage,
DC powered, diaphragm type
positive displacement pumps
designed specifically for water
delivery in remote locations.
They operate on 12 to 30 volts
of direct current that may be
supplied from a variety of
independent power sources
including solar panels and/or
batteries. Power requirements
can be as little as 35 watts.
Constructed of marine grade
bronze and 304 stainless steel,
these pumps are the highest
quality submersible pumps in
their class.
Kyocera’s SD series pumps can be installed below water level in a pond, river or cistern,
or installed by hand into a ground water well. They can be used to fill an open tank or
in a pressurized water delivery system.
Simplicity is the key feature of the SD series pumps. They are easy to install,require
very little maintenance and are completely field serviceable.
The SD series pumps are designed for use in stand alone water delivery systems.
They are pollution-free, corrosion-resistant and quiet. It is the ideal way to provide
water for livestock, remote homes, campsites, small farms or any other need
beyond the commercial power grid.
Model SD 3-70 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P/N 85221
Model SD 6-35 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P/N 85222
Suitable for installation in 4.0 inch (100.0 mm) minimum inside diameter wells. The
addition of a sand shroud requires installation in 5.0 inch (127.0 mm) minimum inside
diameter wells. Flow rates up to 2.4 GPM (9.0 LPM) and heads up to 230 feet
(70.0 meters).
Dimensions (Diameter,Length,Weight): 3.8 in.(96.0 mm),10.75 in.(273.0 mm),21.0 lbs.(9.5 kg)
Pump Outlet Connection Size: 1/2” NPT (SIDR 11.5, 125 psi, Polyethylene tube recommended)
Model SD 12-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P/N 85220
Suitable for installation in 5.0 inch (127.0 mm) minimum inside diameter wells. The
addition of a sand shroud requires installation in 6.0 inch (152.0 mm) minimum
inside diameter wells. Flow rates up to 4.5 GPM (17.0 LPM) and heads up to 100
feet (30.0 meters).
Dimensions (Diameter,Length,Weight):4.62 in.(117.35 mm),10.75 in.(273.0 mm),23.4 lbs.(10.6 kg)
Pump Outlet Connection Size: 3/4” NPT (SIDR 15, 100 psi, Polyethylene tube recommended)
SD 3-70 Performance
Fl
o
w
(Lit
ers P
er Minut
e
)
SD 6-35 Performance
Fl
o
w
(Lit
ers P
er Minut
e
)
SD 12-30 Performance
Fl
o
w
(Lit
ers P
er Minut
e
)
Fl
o
w
(Gallons P
er Minut
e
)
Fl
o
w
(Gallons P
er Minut
e
)
Fl
o
w
(Gallons P
er Minut
e
)
Total Dynamic Head (Meters)
Total Dynamic Head (Meters)
Total Dynamic Head (Meters)
Total Dynamic Head (Feet)
Total Dynamic Head (Feet)
Total Dynamic Head (Feet)