Kawasaki NINJA 650R - Manual (Page 11)

ASSEMBLY 9
•
Install the left bracket on the lower left side
of the engine with the flanged bolts (D = 6, L
= 14) (2) with non-permanent locking agent,
and tighten the bolts to the specified torque.
Torque: 12 N·m (1.2 kgf·m, 106 in·lb)
A. Left Bracket
B. Flanged Bolts (D = 6, L = 14)
•
Pull the left upper fairing outward to clear the
stopper.
A. Clear the stopper.
B. Left Upper Fairing
•
Insert the tabs into the slots to fit the left lower
fairing on the inside of the left upper fairing.
A. Tabs
B. Slots
C. Left Upper Fairing
D. Left Lower Fairing
•
Install the socket bolts (D = 5, L = 16) (3) and
plastic washers (D = 5.3) (3).
•
Install the socket bolt (D = 6, L = 14) and
plastic washer (D = 6.5).
A. Socket Bolts (D = 5, L = 16) and Plastic
Washers (D = 5.3)
B. Socket Bolt (D = 6, L = 14) and Plastic
Washer (D = 6.5)
•
Install the right lower fairing in the same man-
ner as the left lower fairing.
•
Fasten the left and right lower fairings with
three plastic rivets.
A. Plastic Rivets
B. Left and Right Lower Fairings
•
Tighten the socket bolts (D = 5, L = 16).
•
Tighten the socket bolts (D = 6, L = 14) to the
specified torque.
Torque: 8.8 N·m (0.90 kgf·m, 78 in·lb)
Windshield
•
Install the windshield on the upper center fair-
ing with the socket bolts (D = 5, L = 20) (4) and
plastic washers (D = 5.3) (4), and tighten the
bolts.