Maintaining your kambrook toaster, Cleaning, Storage – Kambrook PROFILE KT250 User Manual

Page 9: Exterior cleaning

Advertising
background image

9

Maintaining Your Kambrook Toaster

Cleaning

Always switch the power off at the

power outlet and remove the power

plug from the power outlet before

cleaning the toaster.
To clean any crumbs from the toaster,

slide out the crumb tray from under

the control panel, discard crumbs

and wipe the tray clean. Replace the

crumb tray into position before using

the toaster again. The crumb tray

should be cleaned regularly. Do not

allow breadcrumbs, crusts, dried fruits,

etc. to accumulate in the bottom of

the toaster. To clean any additional

crumbs, turn the toaster upside down

over a sink or bin and shake crumbs

free.
Exterior of the toaster can be cleaned

with a slightly damp cloth then wiped

dry and polished with a soft dry cloth.

Never use any abrasive or chemical

product to clean the exterior of the

toaster.
Do not immerse the appliance or

power cord in water or any other

liquid.

WARNING: Do not

operate the toaster

without the removable

crumb tray in place.

The crumb tray should

be regularly cleaned.

Do not allow crumbs to

build up in the crumb

tray.

Storage

Always switch the power off at the

power outlet, remove the power plug

from the outlet and allow to cool

completely before storing. Follow the

directions for cleaning and store in an

upright position on a flat surface on

your bench top or in an accessible

cupboard. Do not store anything on

top of the toaster.

Exterior Cleaning

The exterior of the toaster can be

cleaned with a damp cloth and

wiped dry.
Never use any abrasive or chemical

products to clean the exterior of the

toaster.
Clean the crumb tray with a dry cloth

and return to toaster before using

again.
If a damp cloth or water is used to

clean the crumb tray, ensure that

the tray is thoroughly dried before

placing the tray back into position.
To secure the crumb tray again, close

the tray on the unit with thumb/

finger in the same grove and slide to

the right and release, ensure that it is

clipped back into position.

KT250_IB_FA.indd 9

13/10/09 11:59 AM

Advertising