Konica Minolta KD-30M - Manual (Page 9)

16
5
mm+
-
2
122mm+-2
16 17
Getting Ready
Note
1. Do not change the battery with wet hands, as there is a
danger of electric shock.
2. Warning
When you continue using the camera for a long time, the
batteries become hot. Contact with the batteries can lead to
burns.
Never open the battery/card cover while the camera is
accessing the card or processing images.
Do not leave the battery anywhere where the temperature
0 0 may reach 60C (140 F), such as inside a car, in the sun,
near a heater, etc.
Do not get the battery wet, drop it or subject it to violent
shocks.
3.Batteries may lose power if kept inside the camera for a long time
without being used. Please remove the batteries while the camera is
not in use.
4. Do not use manganese batteries as they cannot supply sufficient
power to support the camera's operation.
o 5. Batteries may not work normally under 0 C.
6. It's normal that the temperature of the camera body rises after
being in use for a long period.
7. It is suggested to use an AC adapter if you expect to use the
camera for a long period.
Inserting an SD Card
1. Switch off the camera.
2. Open the Battery / Memory Card Cover.
3. Insert the SD card and press it down until you hear a click.
4. Close the Battery / Memory Card Cover.
Getting Ready
Using an AC Adapter (Optional)
1. Ensure that the camera is switched off .
2. Make sure the AC adapter is 3.3V/2.0A.
3. Connect the AC adapter connector to the DC In socket on the camera.
4. Connect the adapter itself with the power outlet
5. Switch on the camera
.
Note
Only use the AC adapter (sold separately) specified for your
camera as use of any other device may result in a breakdown,
fire or electrical shock.