Kenwood KRC-152LG - Manual (Page 13)

— 13 —
Connecting Cables to Terminals
P.CONT.OUT
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Connector Function Guide
Pin Numbers for
ISO Connectors
Cable Colour Functions
External Power
Connector
A–4
A–5
A–7
A–8
Speaker
Connector
B–1
B–2
B–3
B–4
B–5
B–6
B–7
B–8
Yellow
Blue/White
Red
Black
Purple
Purple/Black
Gray
Gray/Black
White
White/Black
Green
Green/Black
Battery
Power Control
Ignition (ACC)
Earth (Ground)
Connection
Rear Right ( + )
Rear Right ( – )
Front Right ( + )
Front Right ( – )
Front Left ( + )
Front Left ( – )
Rear Left ( + )
Rear Left ( – )
FM/AM antenna input
Antenna Cord (ISO)
Battery cable (Yellow)
Ignition cable (Red)
Antenna Conversion Adaptor (ISO–JASO) (Accessory4)
Wiring harness
(Accessory1)
A–7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
Fuse
If no connections are made, do
not let the cable come out from
the tab.
Power control/ Motor antenna
control cable (Blue/White)
Connect either to the power
control terminal when using
the optional power amplifier,
or to the antenna control ter-
minal in the vehicle.