Kenwood KDC-MPV5025 - Manual (Page 18)

18 | English
CD/MP3/WMA/External disc control features
Playing CD & MP3/WMA
When there is no disc inserted
1 Drop open the faceplate
Press the Release button.
2 Insert a disc.
3 Press the faceplate on the left side, and
return it to its former position.
• When the faceplate has been dropped open, it might
interfere with the shift lever or something else. If this
happens, pay attention to safety and move the shift
lever or take an appropriate action, then operate the
unit.
• Do not use the unit with the faceplate in the open
condition. If it’s used in the open position dust can
enter the inside part and cause damage.
• When a disc is inserted, the "IN" indicator is ON.
When a disc is inserted
Press the [SRC] button.
Select the "CD" display.
Pause and play
Press the [ 38] button.
Each time the button is pressed it pauses and
plays.
Eject the disc
1 Drop open the faceplate
Press the Release button.
2 Eject the disc
Press the [ 0] button.
3 Press the faceplate on the left side, and
return it to its former position.
• 3 in. (8cm) disc can’t be played. Using an adapter and
inserting them into this unit can cause damage.
• The MP3/WMA media that this unit can play are CD-
ROM, CD-R, and CD-RW.
The medium formats must be ISO 9660 Level 1, Level
2, Joliet, or Romeo. The methods and precautions to
be followed for writing MP3/WMA data are covered in
'Notes on playing MP3/WMA' (page 8).
Check that section before creating your MP3/WMA
media.
Fast Forwarding and Reversing
Fast Forwarding
Hold down on the [ ¢] button.
Release your finger to play the disc at that point.
Reversing
Hold down on the [ 4] button.
Release your finger to play the disc at that point.
Track/File Search
Searching for a song on the disc or in the MP3/
WMA folder.
Press the [ 4] or [¢] button.
Function of disc changer/ MP3/ WMA
Disc Search/Folder Search
Selecting the disc set in the Disc changer or the
folder recorded on the MP3/WMA media.
Press the [DISC–] or [DISC+] button.
Function of remote
Direct Track/File Search
Doing Track/File Search by entering the track/file
number.
1 Enter the track/file number
Press the number buttons on the remote.