Kodak EASYSHARE C142 - Manual (Page 46)

40 www.kodak.com/go/support
Troubleshooting
Computer/connectivity problems
You cannot take a
picture ■ Turn the camera off, then on again.
■ Depress the Shutter button all the way ( see page 4 ).
■ Insert new/charged batteries in the correct orientation ( see
page 1 ).
■ When inserting a memory card, push it in until it clicks ( see
page 3 ).
■ Memory is full. Transfer pictures to the computer ( see page 34 ),
delete pictures ( see page 18 ), or insert another card.
Memory card not
recognized or camera
freezes with card ■ Use a card reader to check the card on a computer. If it’s
corrupted, format the card in the camera (
see page 33 ).
■ Try another SD or SDHC Card.
Cannot find the
desired picture/video ■ To view pictures on a card or in internal memory, see page 17 .
Status Solution
Slide Show does not
run on an external
video device ■ Adjust the camera Video Out setting to NTSC or PAL ( see
page 32 ).
■ Make sure the external device settings are correct. (See the
device’s user guide).
Computer does not
communicate with
the camera ■ Turn off the camera, then turn it back on.
■ Make sure the battery is charged and installed correctly ( see
page 1 ).
■ Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is
connected to the camera and the computer (
see page 34 ). Then
turn on the camera.
■ See KODAK Software Help at www.kodak.com/go/camerasw .
Status Solution