Klipsch ROOMGROOVE - Manual (Page 6)

We Klipsch Group Incorporated
Of 3502 Woodview Trace, Suite 200
Indianapolis, IN 46268 USA
Declare that
Equipment: iPOD Audio System with Wireless Transmitter / Receiver
Model Name: Klipsch RoomGroove
In accordance with the following Directives:
1999/5/EC
R&TTE Directive : Radio Equipment and
Telecommunications Terminal Equipment
2004/108/EC The Electromagnetic Compatibility Directive
and its amending Directives
has been designed and manufactured to comply with the following specifications:
EN300440-1 V1.3.1 EN300440-2 V1.1.2
EN301489-1 V1.5.1 EN301489-3 V1.4.1
EN50371
I hereby declare that the equipment named above has been
designed to comply with the relative sections of the above
reference specifications. The unit complies with all essential
requirements of the Directives.
Signature:
Name: Clinton Bradley
Position: Certification Engineer
Klipsch Audio Technologies
3502 Woodview Trace, Suite 200
Done At: Indianapolis, IN 46268 USA
On date: 12/12/07
KLIPSCH GROUP INCORPORATED
3502 WOODVIEW TRACE
INDIANAPOLIS, IN 46268 USA
KLIPSCH EUROPEBV
INDUSTRIESTRAAT 1
7041 GD ‘s-HEERENBERG, NETHERLANDS
The remote control battery will need to be changed when it stops
working or when its performance is noticeably reduced. To remove
the battery, simply pull the battery housing tab from the remote
control (as shown in the diagram) and remove the battery. Replace
only with a 3-volt CR2025 lithium battery.
Changing the Remote Control Battery
Note: Lighting and other room conditions can reduce remote
performance.
The RoomGroove’s power supply has an integrated cable
management system. Excess cable length can be wrapped around
the power supply and secured with the rubber straps as shown in
the diagram.
Cable Management System and Mounting the
Power Supply
Your RoomGroove can be wall mounted with the optional wall
mount bracket available at Klipsch.com. Visit Klipsch.com or call
1.800.KLIPSCH (554.7724) for more details.
Optional Wall Mount Bracket
The RoomGroove’s power supply can be convieniently mounted
on the rear of the RoomGroove. To mount the power supply simply
position the hooks on the side of the power supply into the slots on
the rear of the RoomGroove as show in the diagram.
Slots
Hooks
5