Kodak KY0730485 - Manual (Page 10)

Matchprint Professional Server for DocuColor 12 Printer/Copier – Quick Start
2002 Kodak Polychrome Graphics. All Rights Reserved.
10
Spectrocam Setup
1. Shut down the computer.
2. Connect the Spectrocam to the COM 1 (or appropriate) serial port on the back
of the Matchprint Professional Server.
3. Plug the Spectrocam power connector into the AC adapter and then plug the
AC adapter into a power outlet.
4. Power on the computer.
5. Launch the Matchprint Professional Server software.
Note: Always disconnect the Spectrocam from the AC power supply before
removing the Spectrocam from the Matchprint Professional Server.
Calibration Procedure
1. From the Printer menu, select XeroxDocuColor 12 (or the name of the
printer requiring calibration). The Printer Settings window displays.
2. Click on Calibration to display menu selections Perform Printer
Calibration and Printer Calibration Setup.
3. Select Printer Calibration Setup to display the following setup screen: