Kodak CX7300 - Manual (Page 30)

Installing the software
23
3 Load the software:
Windows OS-based computer— if the install window does not appear,
choose Run from the Start menu and type d:\setup.exe where d is the
drive letter that contains the CD.
Mac OS X— double-click the CD icon on the desktop, then click the Install
icon.
Mac OS 8.6 or 9.x— on the install window, click Continue.
4 Follow the on-screen instructions to install the software.
Windows OS-based computer— select Typical to automatically install the
most commonly used applications. Select Custom to choose the
applications you wish to install.
Mac OS X— follow the on-screen instructions.
Mac OS 8.6 or 9.x— select Easy to automatically install the most commonly
used applications.
NOTE: When prompted, take a few minutes to electronically register your camera and software.
This lets you receive information regarding software updates and registers some of the
products included with the camera. You must be connected to your Internet service
provider to register electronically. To register later, see
www.kodak.com/go/register.
5 If prompted, restart the computer. If you turned off anti-virus software, turn
it back on. See the anti-virus software manual for details.
For information on the software applications included on the Kodak EasyShare
software CD, click the Help button in the Kodak EasyShare software.