Konica Minolta BIZHUB C280 - Manual (Page 56)

Configuring the [Configure] tab settings 4
4-24 bizhub C360/C280/C220 (Version 3)
4.8
Reference
- If the setting for [Model] is available, select the model to be used.
- The machine type and option in [Device Option] are specified automatically if [Obtain Settings... ] is set
to [Auto]. If [Auto] is not enabled, be sure to specify the machine and option manually or using [Obtain
Device Information].
- [Function Version] supports the version of this machine. To check the version of this machine, click Util-
ity/Counter in the control panel, and click [Device Information]. If [Device Information] is not displayed,
the version is assumed to be "Version 2". The contents of this manual support the functions of
Version 3.
- Clicking [Obtain Device Information] communicates with this machine and load the status of the in-
stalled options. This function is available only when your computer is connected to and can communi-
cate with this machine. To use [Obtain Device Information], in Administrator Settings of this machine,
set [System Connection] - [OpenAPI Settings] - [Authentication] to [OFF]. For details, refer to the [User's
Guide Print Operations].
- Clicking [Obtain Settings...] allows you to configure the destination.