KiSS Networked Entertainment DP-500 - Manual (Page 3)

3
The laser product label has not been attached to products for U.S.A. and Canada.
Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the safety precautions listed below. Keep these operating
instructions handy for future reference.
Safety
1.Power source :Connect the unit to a power source of the type described in these instructions or as marked on the unit.
2.Polarization - The unit is equipped with a polarized power plug where one blade is wider than the other. This safety feature ensures that the plug fi ts into your
household AC outlet only one way. If the plug doesn’t fi t one way, try reversing it. If the plug still doesn’t fi t, contact an electrician to replace the obsolete outlet. Do not
attempt to defeat the safety purpose of the plug.
3.Power cord protection - Route the AC power supply cord so that it will not be walked on or pinched by items placed on or against it. Never take hold of the plug or
cord with wet hands. Always grasp the plug body fi rmly when connecting and disconnecting it.
4.Overloading - When connecting the AC power supply cord, be careful not to overload the household AC outlet, extension cord, or outlet from any other device as this
can result in fi re or electric shock.
5.Nonuse periods - Turn the unit off when it is not in use. Unplug the unit from the household AC outlet if it is not to be used for a long time. Unplug the unit during
lightning storms.
6.Attachments and accessories - Use only the attachments and accessories recommended in these operating instructions.
Installation
Placement
1. Ventilation - Situate the unit so that it receives proper ventilation. Do not install in a confi ned space such as a bookcase or cabinet. Allow at least 10 cm (4
inches) clearance from the rear of the unit. To prevent the risk of electric shock or fi re due to overheating ensure curtains and other materials do not obstruct
the unit’s ventilation.
2. Foreign material - Ensure objects and liquids do not get into the unit. Avoid exposing the unit to excessive smoke, dust, mechanical vibration, and shock.
3. Magnetism - Situate the unit away from equipment and devices that generate strong magnetic fi elds.
4. Stacking - Do not place heavy objects on top of this unit.
5. Surface - Place the unit on a fl at, level surface.
6. Carts and stands - Use the unit only with carts and stands recommended by the manufacturer. Move carts with care.
Sudden stops, excessive force, and uneven surfaces can cause carts to overturn.
7. Wall and ceiling mounting - Do not mount the unit on walls or ceilings unless specifi ed in the instructions.
Environment
1. Water and moisture - Do not use the unit near water, such as near a bathtub or swimming pool. Avoid damp basements.
2. Heat - Situate the unit away from heat sources, such as radiators. Do not situate where temperatures fall below 5° C (41° F) or rise above 35° C (95° F).
Maintenance
Unplug the unit from the household AC outlet before cleaning.
Clean with a damp cloth.
Do not use abrasive pads, scouring powders, or solvents.
Service
1. Damage requiring service-The unit should be serviced by qualifi ed service personnel if: The AC power supply cord or the plug has been damaged; or Objects
or liquids have gotten into the unit; or The unit has been exposed to rain; or The unit does not operate normally or exhibits a marked change in performance;
or The unit has been dropped or the cabinet damaged.
2. Servicing - Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing
personnel.
3. Replacement parts - When parts need replacing ensure the servicer uses parts specifi ed by the manufacturer or parts that have the same characteristics as
the original parts. Unauthorized substitutes may result in fi re, electric shock, or other hazards.
4. Safety check - After repairs or service, ask the servicer to perform safety checks to confi rm that the unit is in proper working condition.
To clean this unit, wipe with a soft, damp cloth.
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using chemically treated cloth, read the instructions that came with the cloth carefully.