Kenwood KRF-V6080D - Manual (Page 28)

28 EN
ENGLISH
Convenient functions
Adjusting the sound
You can make further adjustments to the sound while listening to
playback in the surround mode.
1 For the remote control, press and hold the TUNER key for more
than 3 seconds to switch to receiver mode.
2 Press the SOUND key until the desired item appears in the
display.
Each time you press the button, the menu changes as follows:
Note that some items are not displayed depending on speaker
settings and listening mode.
1 C (Center speaker level adjustment)*
2 RS (Surround Right speaker level adjustment)*
3 RB (Surround Back Right speaker level adjustment)*
4 LB (Surround Back Left speaker level adjustment)*
5 LS (Surround Left speaker level adjustment)*
6 SW (Subwoofer level adjustment)*
7 INPUT (input level adjustment - analog mode only)
&
8 NIGHT (midnight mode ON/OFF - Dolby Digital and DTS
mode only)
9 PANORAMA (panorama mode ON/OFF)**
0 DIMENSION (dimension adjustment)**
- CENTER WIDTH (center width adjustment)**
= OFF
* The adjustment is only temporary for the current input selection.
The value will return automatically to the original setup value when
the power is turned on/off or when the input selection is changed.
** Pro Logic II x Music mode and Pro Logic II Music mode only.
• If you have selected “SPEAKER” as the Surround Back setting,
“RB” and “LB” are not appeared but “BS” is appeared on the
Display.
3 Use the MULTI CONTROL knob or Multi %/fi keys to adjust the
setting as desired.
4
¢ + +
+
MULTI CONTROL
DIMMER SOUND
Sound
Listen Mode
Dimmer
Multi % / fi
Ambience effects
Midnight mode (Dolby Digital and DTS mode only)
When watching movies at night, you might not be able to raise the
volume as loud as normal. Midnight mode compresses the dynamic
range of previously specified heavy sound passage of the Dolby Digital
and DTS mode sound track (like scenes with sudden increases in volume)
to minimize the difference in volume between the scenes with heavy
sound passage and scenes with normal sound passage. This makes it
easy to hear all of the sound track, even when listening at low volumes.
1 Press the SOUND key repeatedly until “NIGHT” appears on the
display.
• This can be selected only if CD/DVD, DVD/6CH or VIDEO2 is
selected as the source and the listen mode is set to “DOLBY
DIGITAL” or “DTS”.
2 Use the MULTI CONTROL knob or Multi %/fi keys to select the
ON or OFF setting.
• Some Dolby Digital or DTS software may not be compatible with the
Midnight mode.
Panorama mode (Pro Logic II x and Pro Logic II Music mode
only)
When listening to music, you will be able to enjoy the “wraparound”
sound effect when you adjust the panorama mode.
1 Press the SOUND key repeatedly until “PANORAMA” appears on
the display.
• The PANORAMA setting indication scrolls across the display.
“PANORAMA” will be scrolled from right to left.
2 Use the MULTI CONTROL knob or Multi %/fi keys to select
PANORAMA ON or OFF.
1 ON : PANORAMA mode is ON.
2 OFF : PANORAMA mode is OFF.
Dimension mode (Pro Logic II x and Pro Logic II Music mode
only)
When listening to music with certain recordings, you will also be able to
achieve a suitable balance from all the speakers by adjusting the
dimension mode.
1 Press the SOUND key repeatedly until “DIMENSION” appears on
the display.
• The DIMENSION indication scrolls across the display.
2 Use the MULTI CONTROL knob or Multi %/fi keys to adjust the
soundfield towards the rear or the front.
04.1.27, 8:23 PM 28