Set network, Audio agc - whisper mode, Set network audio agc - whisper mode – Samsung SCH-N150 User Manual
Page 104
104
Set network
Your phone is set to digital mode. When in a weak signal area you may wish to
seek better coverage. Your phone allows you to do this, forcibly searching for
analog service. To set network:
1.
In standby mode, press
to display the main menu.
2.
Press
for
Setup
.
3.
Press
for
Set Network.
Select an option, or press to
cancel.
•
1-Time Analog Call
: This switches your phone into analog mode. Your
phone will remain in analog mode for up to 10 minutes until a call is
made. At that time your phone will automatically return to default.
•
Automatic
: This feature automatically looks for all forms of service.
(1.9 MHZ, 800 MHZ, AMPS) according to the PRL (Preferred Roaming
List) supplied by your carrier.
4.
Press
to toggle between options, and press
to save.
Audio AGC - whisper mode
Audio AGC (Automatic Gain Control) or “Whisper Mode” automatically
increases the microphone gain levels to allow the other party to hear your
voice even though you may be whispering.
To set whisper mode:
1.
In standby mode, press
to display the main menu.
2.
Press
for
Setup
.
3.
Press
for
Whisper Mode
.
4.
Press
to toggle between
“on”
and
“off”
.
5.
Press
to
save.
Note: In normal environments, this feature may cause the volume of your voice to be too
loud.