Kenwood MDX-G2 - Manual (Page 11)

Basic
section
11 EN
To take out the CD :
Stop playback by pressing the
7 STOP key, then press the area marked “PUSH OPEN” on
the CD door to open it.
÷ Do not force open or close the CD door, for this will lead to malfunction.
÷ When a CD has been inserted while the power is OFF, simply pressing the CD 6 key in the
STANDBY mode (page 59) turns the power ON and starts playback. (One-touch operation)
÷ For the types of CDs that can be played on this unit, see “Discs which can be played with this
unit” (page 50).
4
Press the VOLUME/MULTI CONTROL keys
to adjust the listening volume.
The volume can also be adjusted using
the VOL.
% / fi keys on the remote.
Operation of keys
Purpose Operation
To stop playback Press the
7STOP key.
To let playback pause Press the CD
6 key. Press it again to resume playback.
To skip a track Press the
¢ key to skip to the next track.
Press the
4 key quickly twice to skip to the previous track.
To fast forward audio Press and hold the
¡ key on the remote during playback, and re-
lease the key at the position you want to restart normal playback.
To fast reverse audio Press and hold the
1 key on the remote during playback, and re-
lease the key at the position you want to restart normal playback.
To start playback Select the desired track number using the skip ¢ / 4 keys.
from the desired track
If “PGM” is lit, switch it off during stop mode by pressing the PGM
key on the remote.
*5052/10-18/EN 5/29/01, 10:32 AM 11