Kreisen KR-400T - Manual (Page 27)

ENGLISH
27
Connecting PC as monitor
Picture adjustment
You can adjust picture Contrast, Brightness,
Horizontal/Vertical position,Clock, Phase, Auto and Reset
as you prefer.
1. Press the TV/AV or TV/PC button to select the PC
mode.
2. Press the MENU button.
3. Press the CHx
xy y button to select the desired
picture item.
4. Press the VOLÏ Ïq qbutton to make appropriate
adjustments.
Contrast
This function is to adjust picture to light/dark.
Brightness
This function is to adjust brightness of picture.
Temperature
Temperature is a measure of the warmth of the image
color.
Horizontal Position/Vertical Position
This function is to adjust picture to left/right and up/down
as you prefer.
Clock
This function is to minimize any vertical bars or stripes
visible on the screen background. And the horizontal
screen size will also change.
Phase
This function allows you to remove any horizontal noise
and clear or sharpen the image of characters.
Auto
This function is for the automatic adjustment of the
screen position, clock and clock phase. The displayed
image will disappear for a few seconds while the Auto-
configuration is in process
Note Some signal from some graphics boards may not
function properly. If the results are unsatisfactory, adjust
our monitor’s position, clock and clock phase manually.
Reset
This function allows you to return to the good picture
reproduction Programmed at the factory and cannot be
changed.
Color
This function is to adjust intensity of the color.
* When DVI source is connected, Clock and Phase
don’t operate.
* When DTV source is connected, you can adjust
picture Contrast, Brightness, Color, Temperature,
Horizontal Position/Vertical Position, Clock and Reset
as you prefer.
xy Ïq MENU TV/AV
Contrast
x
0
Ï
100
q
100
y
1024 X 768
48.4KHz 60.0Hz
xy Ïq MENU TV/AV
Contrast
x
0
Ï
100
q
100
y
1024 X 768
48.4KHz 60.0Hz
<The Picture adjustment of DTV mode>