Kodak i800 Series - Manual (Page 8)

A-61510 January 2005 2-2
Scanner setup To set up the scanner:
1. Set up your scanner operating conditions:
• simplex/duplex
• starting image address
• image order
• lamp timeout
• transport timeout
• transport timeout response
• length detection status and response
• multi-feed detection status and response
• page-on-demand or batch count mode
• starting document count
• batching parameters (batch level, count, start and
end-of-batch functions)
• patch parameters (patch types to recognize, transfer patch
definition)
• printing parameters (printing status, print font, orientation
and strings)
• programmable keys
• level to follow level rules
• confirmation tone
• image address formats
For information on programming these conditions, see Chapters
3 or 4 (depending on your driver). For other vendor tool kits, refer
to their documentation.
2. Select your Color table as appropriate for color document
scanning. See Chapters 3 or 4 (depending on your driver).
For other vendor tool kits, refer to their documentation.