Konica Minolta BIZHUB C252 - Manual (Page 68)

Various Printing Methods 4
C252 4-15
Stapling and Hole Punching
Documents can be stapled together or holes can be punched into the docu-
ment.
By specifying the file margin, you can specify the margin for stapling or hole
punching.
2
Note
The staple function is available only when optional finisher FS-514, FS-
501, or FS-603 is installed.
The hole punch function is available only when optional finisher FS-514
and punch kit PK-510 are installed, or when optional finisher FS-603 and
punch kit PK-501 are installed.
The number of staples that can be selected may vary depending on the
finisher that is installed. When optional finisher FS-501 is installed, spec-
ify “1 staple”. When optional finisher FS-514 or FS-603 is installed, spec-
ify “1 staple” or “2 staples”.
ABCD
ABCDEF
ABCD
ABCDEF
Stapling Hole punching
Operating System Printer Driver Refer to
Windows Konica Minolta PCL “Specifying the Setup Tab Settings” on the
User’s Guide [Print Operations]
Konica Minolta PostScript “Specifying the Layout Tab Settings” on the
User’s Guide [Print Operations]
PostScript PPD “Specifying the Device Options Tab
Settings” on the User’s Guide [Print
Operations]
Mac OS X PostScript PPD “Finishing” on the User’s Guide [Print
Operations]
Mac OS 9.2 “Printer Specific Options (Finishing Options
1 to 4)” on the User’s Guide [Print
Operations]