Kenwood KAC-6104D - Manual (Page 8)

8
English
Controls
1 Power indicator
When the power is turned on, the Power indicator lights.
If the Power indicator does not light when the power is turned on, the protection function may be activated.
Check whether there is any indication of trouble. Refer to <Protection function> (page 5).
2 LPF(Low-Pass Filter) FREQUENCY control
This control adjusts the frequency band output from this unit.
3 BASS EXPANDER switch
Setting this switch to "ON", when a certain volume is exceeded, a dynamic bass sound is output.
4 INPUT SENSITIVITY control
Set this control according to the pre-output level of the center unit connected with this unit, or to the
maximum power output of the genuine-accessory car stereo.
Use the diagram on the right as a guide.
R
LINE IN
INPUT SENSITIVITY[V] LPF FREQUENCY[Hz]
0.2 [MAX] [MIN] 5
SPEAKER LEVEL INPUT L
ON
BASS EXPANDER
OFF
0.5 150 100
200 50
70 0.3
1
4
3
2

 
 40W–15W
0.2 [MAX] [MIN] 5
0.5
0.3
1
4
3
2
KAC-6104D_KE_1English.indd 8 08.10.15 5:33:33 PM