Kodak ESP 1.2 - Manual (Page 13)

Networking Your Printer
8 www.kodak.com/go/aiosupport
4. If the name of your network is:
5. If your network has security enabled, use the LCD keyboard (see Using the LCD
keyboard, page 10 ) to enter your security string.
6. When the confirmation message appears, press OK .
When the printer is successfully connected, the Wi-Fi connectivity LED stops
blinking and remains lit.
The printer with a wireless connection is listed as the name of the printer plus a
number (for example, KodakESP1.2+1133).
7. If you haven’t installed the KODAK All-in-One Printer Software:
a. Go to www.kodak.com/go/aiodownloads .
b. In the search results, click the link for KODAK All-in-One Printer Software for
your computer operating system.
c. Follow the on-screen instructions.
Listed Not listed
Press to select your
network, then press OK .
Make sure your wireless router is turned on and
within range. If your wireless router does not
broadcast its SSID (network name):
1. Press to select Unlisted Network, then press
OK.
2. Use the LCD keyboard (see Using the LCD
keyboard, page 10 ) to enter your network name.
3. Select WEP or WPA/WPA2 as required for your
network's security setup, then press OK.
NOTE: If the name of your network is still not listed,
or you want to change your network, press
to select Rescan for Wireless Networks,
then press OK.