Konica Minolta DiMAGE S404 - Manual (Page 87)

87
AUTO POWER SAVE
The camera will turn off the data panel to conserve battery power if no operation is made within a
certain period. The length of this period can be changed to 1, 3, 5, or 10 minutes. The auto-power-
save option will not affect the display period of LCD monitor; it will shut down after 30 seconds. To
restore the displays when they shut down, simply press the shutter-release button.
When the camera is connected to the computer, the auto-power-save period is set to ten minutes.
This period cannot be changed.
AUDIO SIGNALS
The audio signal can be turned off or on. When on, both tones signals and sound effects are used.
The sound effects simulates a film camera when the shutter is released. The sound effects and tones
can be turned off independantly of each other.
LANGUAGE
The language used in the menus can be changed.
VOLUME
The speaker volume can be increased or decreased. This affects the audio signals only and will not
change the levels of the voice memo or movie audio track.
Off
On
Sound FX only
w/o sound FX
Menu setting
All audio signals are turned off.
Tone signals only to indicate camera opertations.
Shutter effect only. No tone signals during operation.
Shutter effect and tone signals.