Konica Minolta Di1610 User Manual
Page 91
Advertising
5
5.3 Setting Up the Paper Sources
5-14
Di1610/Di1610p
Us
ing th
e Ut
ility
Mo
de
Cha
p
ter 5
5
Using the 10-Key Pad, enter the
width (X) of the loaded paper.
❍
To clear the entered value,
press the [No] key.
✎
Note
The paper width can range
from 90 mm (3-1/2) to 216 mm
(8-1/2).
When entering the paper size,
refer to the diagram on the
right side of the screen to
check which sides of the paper
are the width and the length.
✎
Tip
Enter the value by mm using
the 10-key Pad. Refer to the
conversion rate below.
1 inch = 25.4 mm
6
Press the [Yes] key.
Width(X)
Length(Y)
90-216
Advertising
This manual is related to the following products: