Konica Minolta Di1610 - Manual (Page 12)

1.2 SAFETY INFORMATION 1
Di1610/Di1610p 1-5
Int
ro
duc
tio
n
Chap
ter
1
WARNING
• Do not modify this product, as a fire, electrical shock, or breakdown could result. If the
product employs a laser, the laser beam source could cause blindness.
• Do not attempt to remove the covers and panels which have been fixed to the product.
Some products have a high-voltage part or a laser beam source inside that could
cause an electrical shock or blindness.
• Use only the power cord supplied in the package. If a power cord is not supplied, only
use the power cord and plug that is specified in POWER CORD INSTRUCTION.
Failure to use this cord could result in a fire or electrical shock.
• Use the power cord supplied in the package only for this machine and NEVER use it
for any other product. Failure to observe this precaution could result in a fire or
electrical shock.
• Use only the specified power source voltage. Failure to do so could result in a fire or
electrical shock.
• Do not use a multiple outlet adapter to connect any other appliances or machines.
Exceeding a power outlet’s current rating could result in a fire or electrical shock.
Do not unplug or plug in the power cord with a wet hand, as an electrical shock could
result.
Plug the power cord all the way into the power outlet. Failure to do this could result in a
fire or electrical shock.
• Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or damage
the power cord. Use of a damaged power cord (exposed core wire, broken wire, etc.)
could result in a fire or breakdown.
Should any of these conditions be found, immediately turn off the machine, unplug
the power cord from the power outlet, and then call your authorized service
representative.
• Avoid using an extension cord. Use of an extension cord could cause a fire or
electrical shock. Contact your authorized service representative if an extension cord
is required.
Do not place a flower vase or other container that contains water, or metal clips or other
small metallic objects on this product. Spilled water or metallic objects dropped inside
the product could result in a fire, electrical shock, or breakdown.
Should a piece of metal, water, or any other similar foreign matter fall inside the product,
immediately turn off the machine, unplug the power cord from the power outlet, and then
call your authorized service representative.
• Do not continue using this product if it becomes unusually hot or if it emits smoke,
unusual odors or noise. Immediately turn off the machine, unplug the power cord from
the power outlet, and then call your authorized service representative. If you continue
using it in this condition, a fire or electrical shock could result.
• Do not continue using this product if it has been dropped or its cover is damaged.
Immediately turn off the machine, unplug the power cord from the power outlet, and
then call your authorized service representative. If you continue using it in this
condition, a fire or electrical shock could result.
Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter
and cause burns or other damage.
Connect the power cord to an electrical outlet that is equipped with a grounding terminal.