Konica Minolta Di1610 - Manual (Page 38)

3.4 Control Panel 3
Di1610/Di1610p 3-9
B
e
fo
re
Ma
ki
ng
C
o
pi
es
Chap
ter
3
Display Indications
10 [Start] key • Press to start a scanning or print cycle.
• Press to specify the various settings.
• The indicator lights up in green when the machine can accept copy
jobs.
11 [ ▲] [▼] key • Press to change the zoom ratio in the range between × 0.50 and
× 2.00 in × 0.01 increments.
• Press to scan through the various settings and information, in order.
• Press to specify the various settings.
12 [Zoom] key Press to select a zoom ratio from among those fixed ratios available as
standard.
13 [Paper] key Press to select the paper tray that contains the desired paper.
14 [ ] [Ö ] key • Press to adjust the image density.
• Press to specify the various settings.
15 [Auto/Photo] key Press to change the image density mode.
16 [Sort] key Press to select the sort function.
17 [2in1] key Press to select the 2in1 function.
18 [Status] key Press to display each Counter value. (p. 3-28)
No. Display Indication Description
1 Document type Displays the document type currently specified for the image density.
2 Zoom ratio Displays the currently specified zoom ratio.
3 Number of copies Displays the currently specified number of copy pages and number of
copy sets.
4 Image density Displays the currently specified image density.
5 Paper Displays the currently selected paper tray, paper size and paper type.
No. Part Name Description
Ö
[A]
1 2 3
4 5