Konica Minolta Di1610 - Manual (Page 51)

3 3.8 Loading Originals
3-22 Di1610/Di1610p
B
e
fo
re
Ma
ki
ng
C
o
pi
es
Chap
ter
3
3.8 Loading Originals
Two Ways of Loading the Original
The original may be loaded in the Auto Document Feeder or placed directly on the
Original Glass. Choose the appropriate method according to the type of the
original.
Specific Types of Originals
Loading Originals in the Auto Document Feeder
The Auto Document Feeder automatically feeds originals one page after another so
that the machine can scan the data on each page. After the machine finishes
scanning the data, the Auto Document Feeder ejects the page into the Exit Tray.
To ensure the best possible performance of the Auto Document Feeder, use only
originals of the specified type.
Precautions for Loading Paper Into the Auto Document Feeder
The following types of originals are not suitable for use in the Auto Document
Feeder, as a misfeed or damaged original could result. Place such types of
originals on the Original Glass.
● Typing paper, paraffin paper, and other thin paper
● Cards
● Originals larger than Legal L or smaller than Invoice
● OHP transparencies, translucent paper
● Wrinkled, dog-eared, curled, or torn originals
● Clipped or stapled originals
● Coated originals such as carbon-backed paper
● Up to 25 Letter-size document pages can be scanned and stored in the memory
at one time. However, if the optional expansion memory is installed, up to 180
scanned pages can be stored.
Original Loading Original Type Original Size
Auto Document
Feeder Sheet originals
Weight of originals: 9-1/4 lb to 34 lb A4 L, B5 L, A5 L, Legal L to Invoice,
16 KL, FLS
• Original width: 5-1/2 to 8-1/2
• Original length: 5-1/2 to 14
Original Glass Max. weight of sheet originals, books, or
three-dimensional objects: 6-1/2 lb Maximum: Legal