Kyocera Contax NX - Manual (Page 20)

Used for ABC setting (page 62). Press
the ABC button, and set with the F dial.
This button may also be used for flash
correction (page 75).
Used for focus lock during autofocusing
(page 43).
Also used for one-shot autofocus with
manual focusing (page 45).
Selects first curtain synchronization
(NORMAL) or second curtain synchro-
nization (page 84). Normally set to
“NORMAL”.
Turn the R dial in the direction of
the arrow to display “Metering
mode details”.
“Metering mode details” appears on the
display panel, and the current metering
mode flashes.
Turn the F dial to the desired
metering mode. The selected
metering mode flashes (select the
metering mode details).
Turn the R dial in the direction of
the arrow to display “Drive mode
details”.
“Drive mode details” appears on the dis-
play panel, and the current drive mode
flashes.
Turn the F dial to the desired
drive mode. The selected drive
mode flashes (select the drive mode
details).
Press the mode button to
return to the normal display.
The details of the selected modes are
displayed, and setting is complete.
• Setting may also be completed by half-
pressing the shutter button.
33 32
7. ABC/ button
8. Focus button
9. Sync switch
ABC/ button
Focus button
Sync switch
05-1BC(E)_P025-034 11/15/01 7:27 PM Page 32