KTI Networks KS2028 - Manual (Page 9)

2. Installing the Switch
The switch is designed to operate in workgroup environments without a
complicated configuration procedure. It also features an auto-select 100-
240V, 50/60Hz power supply unit, which works in most countries around
the world.
Before connecting the supplied power cord into the switch, check to see
that the cord voltage and current rating conform to the standards of the
country of operation.
2.1 Packing List
The switch has the following components shipped with it:
• One switch unit
• One AC power cord
• 4 rubber feet for desktop mounting
• 19-inch ack mount kit
• Installation guide
2.2 Mounting the Switch
The switch can be placed on a desktop as a stand-alone unit. When in-
stalling the switch on a desktop you need to attach the rubber feet at
each corner of the unit. The rubber feet are included in the product pack-
age. Allow enough ventilation space between the switch and the objects
around it.
Figure 2-1 Desktop Mounting
4