KORG D4 - Manual (Page 55)

Operation
53
Before using a CompactFlash card, the card must be format-
ted by the D4 itself. Cards formatted on a computer or digital
camera etc. will not be recognized by the D4.
1. Making USB connections to your computer
The D4 has a [USB] connector for direct connection to
your computer, making it quick and easy to back up your
important song data.
The procedure will differ according to the operating sys-
tem of your computer.
Windows users
Supported versions: Windows Me/2000 or later
1 Connect the D4 to your computer.
Connect a USB cable to the [USB] jack of the D4. Con-
nect the other end to your computer system. Make
sure that the connector is oriented correctly, and insert
it all the way into the jack.
2 Display the USB communications page.
Set the [MODE] knob to “USB.”
When the “Ready?” display appears, select “Yes” and
press the CURSOR [
] key. The display will indicate
“CrdReady.”
3 A drive named “Removable Disk” will be added to
your computer.
If you are connecting the D4 for the first time, the
device driver will be installed now.
4 Back up the data to your computer.
When you open the removable disk drive that was
added in step 3, you will see the contents of the Card
that is inserted in the D4. Copy the desired song/effect
data into your computer. Song data from your computer
can also be written to the Card.
5 Turn off the USB connection.
Left-click the card icon displayed in the right side of
your computer’s taskbar. In the menu that appears,
left-click “Stop USB disk driver (drive name).” Make
sure that a message indicating that the “USB disk may
be disconnected safely” is displayed. Make sure that
the display has changed from “CardLock” to
“CrdReady,” and press the CURSOR [
] key. When
the display indicates “Complete,” select “Yes” and
press the CURSOR [
] key. After returning to Locate
mode, disconnect the USB cable from the D4.
Macintosh users
Supported versions: Mac OS 9.0.4 or later
1 Connect the D4 to your computer.
Connect a USB cable to the [USB] jack of the D4. Con-
nect the other end to your computer system. Make
sure that the connector is oriented correctly, and insert
it all the way into the jack.
2 Display the USB communications page.
Use the [MODE] knob to select “USB.” Make sure that
the display indicates “Ready?” Then select “Yes” and
press the CURSOR [
] key.
D4
Load a file
Save a file