Tagging pictures for printing, Printing tagged pictures – Kodak CX7530 User Manual
Page 40
Sharing pictures and videos
34
www.kodak.com/go/support
Tagging pictures for printing
1 Press the Share button. Press
to locate a picture.
2 Press
to highlight Print
, then press the OK button.*
3 Press
to select the number of copies (0-99). Zero removes the tag
for that picture.
The Print icon
appears in the status area. The default quantity is one.
4 Optional: You can apply a print quantity to other pictures. Press
to
locate a picture. Keep the print quantity as is, or press
to change it.
Repeat this step until the desired print quantity is applied to the pictures.
5 Press the OK button. Then press the Share button to exit the menu.
* To tag all pictures in the storage location, highlight Print All, press the OK
button, then indicate the number of copies as described above. Print All is not
available in Quickview.
To remove the print tagging for all pictures in the storage location, highlight
Cancel Prints, then press the OK button. Cancel Prints is not available in
Quickview.
Printing tagged pictures
When you transfer the tagged pictures to your computer, the Kodak EasyShare
software print screen opens. For details on printing, click the Help button in
the Kodak EasyShare software.
For more information on printing from your computer, printer dock,
PictBridge-enabled printer, or card, see
.
NOTE: For the best 4 x 6 in. (10 x 15 cm) prints, set the camera to the Best (3:2) print quality
setting. See