Kenwood KAC-9103D - Manual (Page 4)

4 English
2WARNING
To prevent fire caused by a short in the wiring,
connect a fusible link or breaker nearby the
battery’s positive terminal.
2CAUTION
• If sound is not output normally, immediately
turn power off and check connections.
• Be sure to turn the power off before changing
the setting of any switch.
• If the fuse blows, check wires for shorts, then
replace the fuse with one of the same rating.
• Check that no unconnected wires or
connectors are touching the car body. Do
not remove caps from unconnected wires or
connectors to prevent short circuits.
• Connect the speaker wires to appropriate
speaker connectors separately. Sharing the
negative wire of the speaker or grounding
speaker wires to the metal body of the car can
cause this unit to fail.
• After installation, check that the brake lamps,
winkers, and wipers work properly.
NOTE
• Do not connect cables and leads to both RCA
cable input jacks and the speaker level input
terminals simultaneously, for this may cause
malfunction or damage.
* Commercially available parts
30 30
Connection
Lead terminal*
Battery Ground wire*
Power control wire
Subwoofer (L + R)
Battery wire*
Protective Fuse*
Terminal cover
30 30
CENTER UNIT
(CD receiver, etc.)
RCA cable*
Power control wire
Left input
Right input
30 30
■ RCA cable or Speaker level input connection
■ Power wire and Speaker wire connection
Genuine-accessory car
stereo (No line output
center unit etc.)
ACC
Battery
Car fuse box
• RCA cable connections
• Speaker level input connections
Cable Color of the connector
Left
9 White
· White/Black
Right
9 Gray
· Gray/Black
Terminal cover