Kenwood DNX7220 - Manual (Page 27)

English 27
Radio Listening
Various control screens appear in the Tuner Source mode.
• For the basic method of receiver button operations, refer to <Basic Operations> (page 10).
• Set the remote controller mode switch to "AUD" mode before starting operation, refer to <Remote Controller mode switch>
(page 86).
Functions While Displaying the Control
Screen
Switches to the source control screen to use
various functions.
5
8 8
6
10 11 12 13 9
7
1 2 3
4
14 15
16
19 17 18 20
1 Band display
2 Preset number
3 Frequency display
4 Radio station information display.
Selects the Program Service Name, Title &
Artist name, Category Name 1/2, or Radio
Text.
5 Turns the Traffic Information function On or
Off.
See <Traffic Information>, (page 30).
6 Switches to the FM1/2/3 band.
7 Switches to the AM band.
8 Tunes in a station.
Use the <Seek Mode> (page 28) to change
the frequency switching.
9 Switches the button display.
p Select the Monaural reception. (Only when
receiving the FM broadcast)
q Selects the Auto Memory mode.
(Refer to page 28 for the <Auto Memory>)
w Switches the Seek mode.
(Refer to page 28 for the <Seek Mode>)
e Switches the number of lines displayed in
the Information Display.
r Displays the Hands Free screen. (page 49)
t Turns the Loacal Seek function ON or Off.
y When
P1 to P6 buttons appear, you
can recall the stations on memory.
For memory of broadcasting stations, refer
to <Auto Memory> (page 28) or <Manual
Memory> (page 29).
u Searches station by program type. See
<Search for Program Type> (page 31).
i Lists and selects memorized station. See
<Preset Select> (page 29).
o Displays Radio Text screen. See <Radio
Text> (page 30).
; Displays the external device control
screen. See <External Device Power Supply
Control> (page 45).