Kompernass KH1281-04/07-V1 User Manual

Page 9

Advertising
background image

- 7 -

Putting the Steam Iron Away
After Use

• Remove the power plug from the

power socket.

• Empty the water reservoir and clean

the gliding sole

ብ.

• Place the cool steam iron horizontally

on a soft, clean base.

Drip-Stop Function

In conventional steam irons, it is possible
that at too low ironing temperature wa-
ter begins to trickle from the base of the
iron. However, this iron possesses a new
technical feature, namely the DRIP-STOP
function, to switch off steam. The iron
automatically switches off the steam
ejection at low temperatures. A “CLICK”
noise is heard when this happens.
Using the temperature rotary controller
ቫ, set the required temperature.
Steam generation will continue as soon
as this temperature level is reached.

Cleaning

Self-cleaning function
• Fill the water container up to the

marking MAX.

• Insert the plug into the power socket.
• Set the temperature regulator

to the position MAX.

• Let the iron warm up till the control

light

ባ cuts off and lights up again.

• Hold the iron horizontally over a

trap vessel.

• Set the steam regulator

ቨ to Self-

Clean position and hold it in this posi-
tion. Now steam and boiling water will
start emerging from the steam escape
holes at the base of the iron. Any dirt,
if present, will get washed out.

• Release the steam regulator

ቨ as

soon as the water in the water
container is used up.

• To ensure that no water remains in

the steam chamber, dry the base of
the iron thoroughly. For this purpose,
wipe the base of the iron a few times
on a towel or an old cloth.

• Allow the iron to cool down before

storing it away.

Note: The effect of the self-cleaning
function can diminish after extended
usage of the iron. We therefore
recommend the addition of decalcifi-
cation agent into the water tank.

Casing
• Clean the casing only with a soft

dry cloth.

• Do not use aggressive or chemical

cleaning agents.

Metal Parts
• Clean the metal parts with a cloth

slightly moistened with water and a
mild, non-foaming cleaning agent.

Troubleshooting

The steam iron puts out only little or
no steam
The water reservoir in the steam iron is
empty. Fill the water reservoir with tap
water (see "Filling with Tap Water“).

KH 1281

IB_KH1281_E4951_UK 11.05.2007 11:36 Uhr Seite 7

Advertising