Troubleshooting guide – Kenwood KDC-MP919 User Manual

Page 43

Advertising
background image

— 43 —

?

Even though Synchronize Clock is ON, the clock can’t be adjusted.

35

✔ The received RDS station isn’t sending time data.

☞ Receive another RDS station.

?

Even though the vehicle light switch is turned ON, the unit’s display
won’t dim.

36

✔ The dimmer wire isn’t connected.

☞ Connect the dimmer wire correctly.

?

The Dimmer function doesn’t work.

38-1

✔ The Dimmer wire isn’t connected correctly.

☞ Check the Dimmer wire connection.

Tuner source

?

Radio reception is poor.

39

✔ The car antenna is not extended.

☞ Pull the antenna out all the way.

✔ The antenna control wire is not connected.

40

☞ Connect the wire correctly, referring to the section on

<Connecting Wires to Terminals>.

?

The desired frequency can’t be entered with the Direct Access Tuning.
✔ A station that can’t be received is being entered.

☞ Enter a station that can be received.

✔ You’re trying to enter a frequency with a 0.01 MHz unit.

42

☞ What can be designated in the FM band is to 0.1 MHz.

Disc source

?

"AUX" is displayed without achieving External disc control mode.

50

✔ O-N switch is set to "O" side.

☞ Set the switch to "N" side.

✔ Unsupported disc changer is connected.

51

☞ Connect the supported disc changer. (page 4)

?

The specified disc does not play, but another one plays instead.

52

✔ The specified CD is quite dirty.

☞ Clean the CD.

✔ The CD is upside-down.

53

☞ Load the CD with the labeled side up.

✔ The disc is loaded in a different slot from that specified.

54

☞ Eject the disc magazine and check the number for the specified

disc.

✔ The disc is severely scratched.

55

☞ Try another disc instead.

?

The specified track will not play.

58

✔ Random play or magazine random play has been selected.

☞ Turn off random play or magazine random play.

?

Track repeat, disc repeat, track scan, random play, and magazine
random play start by themselves.

59

✔ The setting is not canceled.

☞ The settings for these functions remain on until the setting to off

or the disc ejected, even if the power is turned off or the source
changed.

?

The specified track will not play.

58-a

✔ Random play has been selected.

☞ Turn off random play.

?

Cannot play CD-R or CD-RW.

60

✔ Finalization processing is not being conducted for CD-R/CD-RW.

☞ Conduct finalization processing with CD recorder.

✔ A non-compatible CD changer is being used to play the CD-R/CD-

RW.

61

☞ Use a CD changer compatible with CD-R/CD-RW to play.

?

A CD ejects as soon as it is loaded.

62

✔ The CD is upside-down.

☞ Load the CD with the labeled side up.

✔ The CD is quite dirty.

63

☞ Clean the CD, referring to the section on <CD cleaning> (page 8).

?

The disc won’t insert.

65

✔ There’s already another disc inserted.

☞ Press the [

0] button and remove the disc.

?

Direct Track Search and Direct Album Search can’t be done.

66-1

✔ Another function is ON.

☞ Turn Random Play or other functions OFF.

?

Track Search can't be done.

66-2

✔ For the albums first or last song.

☞ For each album, Track Search can't be done in the backward

direction for the first song or in the forward direction for the last
song.

Troubleshooting Guide

KDC-X859_U.S_r1 01.12.10 9:40 AM Page 43

Advertising